Simplify Your Cellular Design with Symmetry's Exclusive IN-A-BOX Quick Start Development Kits
Wednesday, June 11, 2014
Symmetry Electronics has made Cellular M2M design easier with custom Cellular IN-A-BOX quick-start development kits based on Telit CE910, DE910, HE910 and GE864-GPS M2M modules available exclusively on SemiconductorStore.com. Each kit includes everything required to begin a cellular design for a variety of applications. The kits provide a stable hardware platform on which to begin software development, along with a software tool that verifies the setup. The various cellular technologies supported include: 3G, HSPA+, GSM, CDMA, 1xRTT, EVDO, and GPS. Using the included step-by-step Getting Started Guide, an engineer can be up and running with any one of our custom kits in less than 3 minutes.
Cellular IN-A-BOX kits are ideal for the development of applications including:
- Mobile computing devices
- Tablet PCs
- Consumer electronics
- Fleet management
- Vehicle navigation
- Smart metering
- POS terminals
- Asset tracking
Each kit includes:
- Telit EVK2
- Telit Interface Board
- Software Development Introduction Tools
- Cellular Antenna(s)
- Power Supply
- Getting Started Guide & Documentation
Telit DE910-DUAL Kit
The EVDO-IN-A-BOX kit is based on the Telit DE910-DUAL CDMA module. This kit contains everything you need to start your CDMA 1xEV-DO cellular design and is pre-programmed for the Aeris, Sprint, or Verizon network. DE910-DUAL is a dual band 1xEV-DO Rev. A 3G wireless module supporting down-link data rates up to 3.1 Mbps and uplink data rates up to 1.8 Mbps. The DE910-DUAL offers complete backward compatibility to 1xRTT. Moreover, it is designed to have the same form factor of its UMTS / HSPA counterpart product family, the HE910.
Telit CE910-DUAL Kit
The RTT-IN-A-BOX kit is based on the Telit CE910-DUAL CDMA module. This kit contains everything you need to start your CDMA 1xRTT cellular design and is pre-programmed for the Aeris, Sprint, or Verizon network. CE910-DUAL is a dual band 1x RTT wireless module supporting up/down link data rates up to 153.6 kbps. Its compact LGA form factor is pin-to-pin compatible throughout the xE910 family, allowing an easy integration of different 2G-3G wireless technologies into the same design.
Telit HE910 Kit
The 3G-IN-A-BOX kit is based on the Telit HE910 3G HSPA+ module. This kit contains everything you need to start your cellular M2M design. HE910 modules are small, lightweight, low power consumption and RoHS compliant devices which combine the access to digital communication services in GSM, GPRS, EDGE, UMTS and HSPA networks with Land-Grid Array (LGA) form factor.
Telit GE864-GPS Kit
The GSM + GPS-IN-A-BOX development kit is based on the Telit GE864-GPS module and includes everything you need to start your cellular plus GPS M2M design. GE864-GPS is the smallest GSM/GPRS module in the market integrating full 48-channels A-GPS functionality. It combines the high performance from Telit's proven GSM/GPRS core technology with the latest SiRFstarIV high sensitivity single-chip A-GPS receiver. The Ball-Grid-Array (BGA) package allows the end application to have a very low profile and small overall dimensions, making it possible to design extremely compact location based services solutions. Since connectors are eliminated, the cost is significantly reduced as compared to conventional mounting.
Interested in purchasing a Telit IN-A-BOX kit? Call Symmetry at (310) 536-6190 or contact us online.
Stay up to date with industry and supplier news!